All the pieces about LED Strips four – Everlasting Debates – SMD3528 Vs SMD5050

SMD 3528 vs SMD 5050, these two sorts of chips are used to this point streaks and it’s indispensable to tell apart which one is used for each as a result of it’s going to have an effect on the value, however in fact efficiency. So what are their traits and variations?

SMD 3528 Strips LED is a versatile medium energy, low-temperature LED device. The 5-meter rolls with 300 chips normally produce 120-220 lm / m (Pure White), sufficient to accommodate as much as 300 mm (1 & # 39;). Some producers supply ultra-white variations that provide as much as 360lm / m. This kind of LED SMD Strip has a median energy consumption of 5W / m. Bigger producers additionally supply greater density rolls with 600 chips per 5 m roll per 440lm / m (Pure White) efficiency, which is even above 720lm / m in comparison with the Extremely White variations. The vitality consumption on this case is approx. 10 W / m. Most 3528 LED strips could be reduce to three LED modules or 50 mm (2 ") 300 wings and 25 mm (1") to 600 chip chips. The SMD3528 is a colour LED strip lighting resolution. The cheaper possibility for the value.

SMD 5050 Versatile Strip LED is a excessive efficiency, greater warmth SMD LED possibility. These are normally referred to as triple core streaks (if intently examined, three totally different areas could be recognized on the chip). Strips of the sort of SMD LED versatile strips normally have a wider selection, that are the commonest of normal density rolls, with 30 chips (360lm / m Pure White) and seven.5W / m energy consumption, some producers supply greater density, normally shorter coils for instance, three meters, 60 chips per meter, which is superb in 720lm / m Pure White at 14.5W / m of vitality. As we are able to see, the SMD 5050 will increase the brightness of 3528 tape 3 times, so the 5050 LED is nicely suited to light up areas which can be topic to excessive ambient lighting. The LED strip 5050 can be used to interchange fluorescent tubes for common lighting and light-weight containers. As a consequence, they’re logically costlier, however they’re extra advantageous for high-light tools since their value per lumen is usually decrease.

The 5050 tape is a one-color and RGB colour change mannequin. Coloration shifting requires extra management however it could produce tens of millions of various colours, so discovering the proper hue or mixture is an easy matter of programming.

What kind of SMD is best? The reply is straightforward, it relies upon. For low mild necessities for major lighting tasks, monochrome, and if value is crucial issue, the SMD3528 prevails. For extra demanding tasks or RGB installations, the SMD5050 is the apparent selection.

Supply by Bruce Leed

Leave a Reply

Your email address will not be published. Required fields are marked *