Brother Laser Printer – Fax and Brother Multifunction Printer Error Codes and Restoration

Brother provides a full vary of fax machines, printers and multifunction printers. Nonetheless, the record of frequent error codes present in them can disrupt essentially the most skilled troubleshooter. Beneath we clarify frequent errors and troubleshooting them.

Error Code: E50: Injury to Fuser Unit

This will happen when the warmth curler is destroyed or broken.

Error code E51: Laser beam safety

This error code signifies that the beam, mirrors, or lid usually are not appropriately aligned.

Error code S05: Error with knowledge bus

This error code signifies that the info is transmitted concurrently. This downside can solely be achieved by restoring the printer generally.

"Machine Error" Error Code: Desk Issues

The sort of error code is often a loud steady beep on the Brother fax machine. Verify the soldering joints to verify they’re too chilly on the energy provide web site. As well as, it’s essential to examine that these joints happen on all different tabs earlier than a change is made. If there isn’t any enchancment after the alternative, attempt to change the capacitors to energy the facility provide.

"Black Sheets" Error Reporting

This error code often prints black pages from the Brother Laser Printer. That is often performed on the Brother 960 and Brother 1260 fashions. Which means that HVPS is flawed. As a substitute, change the next diodes and change the jumper wire. The diodes D31, D33, D30 and D32 should be changed. The jumper wire requires a monitor gauge 22.

"Paper Tray Verify" error message

The error is eradicating the paper feed paper by a remedial paper path. Then merely clear the paper drain rollers.

"Chopping Issues" Error Message

This error message seems when a paper jam has occurred or the machine doesn’t reduce the paper correctly. Verify whether or not the slicing spring is flawed or not. Take care to take away the cutter and clear after which lubricate. If the issue persists, strive changing the gearbox.

"Poor copy high quality" error message

Typically there could also be some grey spots on the scanned paper. Ensure the glass and the scanning mirrors are clear. If they’re clear, then the issue lies with the digicam. You may strive troubleshooting by pulling out the Brother fax machine for a minimum of one full night time. It’s advisable to keep away from swiping the camcorder

Supply by James Kara Murat

Leave a Reply

Your email address will not be published. Required fields are marked *